#!/bin/sh

# redial - 10/01/95

#In the pppd command below, you should replace the word user
#with your user id and the word passwd with your passwd.

#Note that for 14400 or 28800 modems you must give the speed
#as 38400 in the pppd command. If you use 57600, UNIX will
#choose 9600. This is because the UNIX shell was written
#before anyone even imagined baud rates higher than 9600.
#linux has corrected this somewhat by using 38400 to mean
#anything >= 38400. (Provided you have used setserial.)

while test -e ~/dial.is.it.there
do
pppd connect 'chat -v ABORT BUSY  "" atz OK atdt8637777 CONNECT "" ogin: user word: passwd oice: ppp' /dev/modem 38400 -detach debug crtscts modem defaultroute :128.118.2.21 netmask 255.255.255.0
done

#This program written by Bruce Babcock, Peter Morris,
#David Mansfield, Richard Mansfield